request-quote Call: 905-830-2776
HomeStars Review Our Work

Main Services

Interior Painting

Interior painting is very important, and requires a keen eye for colour and style. We take the time to make sure your area is clean and inviting, while providing helpful tips and colour selections.
read more

Exterior Painting

Your home is an enormous asset and should be handled with care. Our experts will ensure your woodwork and delicate areas, are prepared and finished with superior results.
read more

Renovations Guideline

When taking on a renovation or remodel, it's important to outline several factors. First you need to consult your budget.

At Sharrison Painting and Renovations, an experienced member can sit down with you and outline a fair and reasonable budget plan to suit your needs. We'll help you focus on areas of the home with the largest return for selling and also take into consideration your needs and desires.

Not only is it important to factor in budget and desires, its equally important to know who you're hiring. We take the time to outline our work and show you which members of our team will be assisting in the reno.

All of our essential service contractors are fully licensed and insured, and backed by a 2 year warranty.

What we offer

  • 1- Condo & Home Renovations
  • 2- Bathroom Renovations
  • 3- Plumbing
  • Our plumbers are fully licensed, and ensure their work is perfectly executed. Listed below are the essential services they provide

    Study building plans determining materials required and details of work to be performed based on builder specifications and building codes

    Extend water and sanitary pipes from city line into basement foundation

    Measure, cut and drill holes in wall studs, joists, ceilings and floors using hole saws

    Measure, cut and assemble copper and/or pex piping using elbows, couplings, bushings, pipe cutters, crimpers, crimper rings, solder and flammable heat for water system piping

    Measure, cut, thread and assemble copper or flexible piping using tape measure, pipe cutters and pipe threading machine

    Secure piping using brackets, clamps, screws and nails

    Measure, cut and install flashing around roof venting system

    Connect copper plumbing lines to main water and hot water tank and plastic plumbing pipes to sanitary drainage system

    Connect gas lines to appliances such as furnace, hot water tanks, dryers, stoves, fireplaces and barbeques

    Test lines for leaks using compressed air or water

    Ensure work area is clean and safe.

  • 4- Electrician
  • Study building plans determining materials required and details of work to be performed based on builder specifications and building codes

    Mount electrical usage meter to exterior wall

    Extend wiring from property line and hook up to electrical usage meter

    Mark out locations of all lighting fixtures and outlets based upon building blueprints

    Mount fixture boxes to wall studs using hand tools and nails

    Install plastic poly vapor barriers around fixture boxes on exterior walls and ceilings

    Cut and drill holes in wall studs, joists, ceilings and floors using hole saws

    Pull and install wiring throughout house to all required fixtures and main circuit board

    Install and mark panel breakers for identification

    Install all lighting and outlet faceplates

    Check switches and plugs for correct polarity and troubleshoot any problems

    Ensure work area is maintained clean and safe.

  • 5- Hardwood Floor Covering Installer
  • Study building plans to determine materials required and details of work to be performed based on builder specifications and building codes

    Determine optimal layout pattern and minimize waste

    Inspect, clean and prepare sub-floor

    Interlock and fasten tongue-and-groove jointing

    Apply stains for desired appearance and urethane for protection

    Maintain a clean and safe work area.

  • 6- Drywalling
  • Study building plans determining materials required and details of work to be performed based upon builder specifications and building codes

    Ensure poly vapor barrier on exterior walls is fastened correctly and repair if necessary

    Measure wall or ceiling area determining optimal drywall layout

    Maneuver drywall to required locations throughout worksite

    Cut/score drywall to specific dimensions using tape measure and knife

    Measure, cut, fit and fasten drywall to ceilings and interior walls

    Remove drywall from window openings, light switches and electrical plug outlets using a router

    Locate screws protruding from drywall surface, and set beneath surface using hand drills

    Apply drywall compound to all seams, screw heads, gouges and corners in ceilings and walls using hand trowels and broad knives establishing a smooth, flush surface

    Measure and cut drywall tape (paper), plastic, metal and paper corner beading, and set into drywall mud, removing excess compound with hand tools

    Repeatedly apply drywall compound until build up reaches desired specifications, sanding between applications (if necessary)

    Maintain tape and fill machines

    Ensure ventilation and temperature are adequate for drywall compound application and drying

    Use air-compressed spray guns to apply a textured spray mixture to ceilings

    Ensure work area is clean and safe.

  • 7- Tiling
  • Study building plans determining materials required and details of work to be performed based upon builder specifications and the Alberta Building Code

    Inspect and repair sub-floor or drywall of any protruding nails/ screws, seams or minor deficiencies

    Calculate squareness of room or wall determining starting point and spacing measurements required for equal distribution of tiles

    Measure and snap chalk lines determining level lines and tile borders

    Measure, mark and cut tiles as required using tile cutters and tile breakers

    Apply adhesive to sections of wall or floor using notched trowel

    Place and press tiles into adhesive with the required spacing, using prefabricated spacers

    Mix and apply grouting compound over entire surface, filling spacing between tiles

    Wash off excess grouting using warm water and a sponge creating beveled edges in between tiles, and dry with a dry towel

    Apply silicon at junctions where tile switches into wall, ceiling or flooring

    Ensure work area is clean and free of hazards.

  • 8- Framing
  • Study building plans determining materials required and details of work to be performed based on builder specifications and building codes

    Ensure work area is clean and hazard-free

    Set up and dismantle scaffolding

    Install all components of floor systems

    Build and install all components of wall systems

    Lay out and install all components of roof systems

    Frame chimney chases, cut ventilation and heating holes

    Install windows and exterior doors

    Install exterior and interior stairs

    Build decks and porches.

Contact Us